Tubing Bender and Die Set

Plans to Build Tubing Bender along with Files for the Following Bending Dies:

1" Round, 4" Centerline Radius, Tested with 0.083 and 0.120 wall
1" Square, 4" Centerline Radius Tested with 0.065 wall
1-1/4" Round, 4.5" Centerline Radius, Tested with 0.083, 0.095 and 0.120 wall
1-1/4" Square, 4.5" Centerline Radius, Not Tested
1-1/2" Round, 4.5" Centerline Radius, Tested with 0.083 and 0.095 wall. 0.120 wall is questionable.
1-1/2" Square, 4.5" Centerline Radius, Not Tested

Bender and Dies are Protools 105 cross compatible.

Plans are only available through electronic download.

What’s Included…
.stl files for 3D printed parts
.dxf files for sheet metal parts
Drawings for all metal parts
BOM for and links to purchase

*****Not compatible with JD2****

Tubing bender has been tested to 2" with 0.180" wall

***It is not recommended to bend DOM tubing with the Bending dies, only ERW***

*****PLEASE READ***** The bending dies are created by 3D printing a core out of PETG material. We recommend a printing temperature of 260c degrees and a bed temp of 85c degrees. Please verify your printer is capable of printing at these values. Bed size of 9.75x9.75 inches required for 1.25" and 1.5" die cores.

*****We will not supply 3D printed Cores or the Plasma Cut Metal outer parts*****